Showing 17–32 of 40 results
Skunk2 Racing is proud to announce the release of its Spherical Bearing Compliance Bracket for the front lower control arms on the ’92-’95 Civic and ’94-’01 Integra. Skunk2 Racing’s Billet Compliance Bracket w/ Spherical Bearings are direct replacements for your soft and worn OEM units that compromise geometry for comfort. Our Billet Brackets and Spherical…
All shift lights plug directly into Digital Shift Controller or AutoMeter tachometer with dedicated shift light connector
Before Banks engineers design; build and test power systems; they first examine stock vehicles to see where components choke airflow; create backpressure; raise EGTs; and compromise fuel delivery; Banks then gives back the power; durability and engine efficiency the factory left on the table. The ultimate system for ferocious towing power and durability. Includes lifetime…
The Tower of Power is one of the most advanced wheeled battery chargers on the market today. The tall,slender design places controls at an easy to adjust level that allows the charger to fit?easily between cars and lifts in the shop. We bulked up the internals and included an ultra heavy-duty transformer with 100% copper…
Holds two drinks, deep wells with mug handle cutouts place beverages within easy reach and prevent messy spills associated with substandard factory equipment. This Part Fits: Year Make Model Submodel 1999-2001 Ford F-250 Super Duty Lariat 1999-2001 Ford F-250 Super Duty XL 1999-2001 Ford F-250 Super Duty XLT 1999-2001 Ford F-350 Super Duty Lariat 1999-2001…
Holds two drinks, deep wells with mug handle cutouts place beverages within easy reach and prevent messy spills associated with substandard factory equipment. This Part Fits: Year Make Model Submodel 1994-1996 Dodge Ram 1500 Base 1997 Dodge Ram 1500 Laramie 1997 Dodge Ram 1500 LT 1997 Dodge Ram 1500 Sport 1997 Dodge Ram 1500 ST…
This low profile OBD-II signal splitter / pass through alows for remote location of connections for AutoMeter products like AirDrive,DashLink,DashControl and SmartConnect instrumentation while providing an additional easy to access connection point for other onboard devices requiring access to the OBD-II data stream.
This universal fuel level sensor from AutoMeter is the perfect solution for custom made fuel tanks and installations where the original liquid level sensor is unable to be used. Engineered for top down, drop-in mounting orientation with user-adjustable geometry, this sensor can be configured for tanks with overall depths between 5 and 24 inches and…
For mechanical pressure gauges (except fuel, nitrous, or brake pressure gauges). Includes 6 ft. of 1/8″ copper line, 1/8″ NPT Male to 1/8″ compression fitting, 1/8″ NPT Female to 1/8″ compression fitting, grommet, and 1/8″ NPT to 1/4″ NPT bushing.
For use with mechanical pressure gauges up to 200 PSI. Includes 10ft. of 1/8″ Nylon Tubing, 1/8″ NPT Male to 1/8″ compression fitting, 1/8″ NPT Female to 1/8″ compression fitting, and 1/8″ NPT to 1/4″ NPT bushing. DO NOT USE with Fuel Pressure, Brake Pressure, or Nitrous Pressure gauges.
Finding the perfect place to mount your AutoMeter gauge can be a challenge sometimes. Using AutoMeter’s universal gauge cup, you can mount your gauge anywhere you see fit. The universal pedestal gauge cup can be mounted inside or outside of the cabin, on top, or under the dash. The possibilities are endless.
5/8″-18 UNF Female (adapts directly to sealing nut on AutoMeter Mechanical Temp Gauges) to 3/8″ NPT Male
These replacement temperature sensors are designed specifically for use with AutoMeter short sweep electric air core gauges and are suitable for cylinder head monitoring and for replacing AutoMeter sensor #2258 where clearance and depth issues would otherwise prevent typical installation.
Optimally positions key performance data within driver’s field of vision This Part Fits: Year Make Model Submodel 1990-1997 Mazda Miata Base 1993 Mazda Miata LE 1994-1997 Mazda Miata M Edition 1991 Mazda Miata SE 1997 Mazda Miata STO
These replacement temperature sensors and included 3/8″ and 1/2″ adapter bushings are designed specifically for use with AutoMeter short sweep electric air core gauges.
These pressure transducers are designed to measure fluid pressure in relation to ambient pressure. Compatible with a wide array of common automotive fluid types including but not limited to water / coolant, gasoline, ethanol, methanol, diesel, air, nitrous oxide, oil, and brake fluid. Constructed from solid state components and stainless steel for unparalleled durability and…
ACL BMW 3201cc Standard Size High Performance Rod Bearing Set
1 × $98.00 
Torque Solution Short Shifter Lever 2013+ Ford Focus ST
1 × $17.06 
Bushwacker 06-08 Dodge Ram 1500 Fleetside Pocket Style Flares 4pc 97.9/98.3in Bed - Black
1 × $99.00 
Borla 21-22 Ford Bronco 2.3L 4WD Touring Axle Back Exhaust w/ Bright Chrome Tips
1 × $33.20 
Bushwacker 10-18 Ram 2500 Fleetside Max Pocket Style Flares 2pc - Black
1 × $100.00 
Mishimoto 03-09 Nissan 350Z / 03-07 Infiniti G35 (Coupe Only) Oil Cooler Kit
2 × $34.86 
Clutch Masters 14-19 Mazda3 2.5L Aluminum Flywheel
1 × $99.00 Subtotal: $515.98
